Sale!

Chime:30 – Line 6 Helix Patch

$4.99

Line 6 Helix patch based on the Matchless DC30 and Vox AC30 amp models. Includes multiple drive, delay, reverb, and modulation options, specifically dailed in for modern praise and worship.

Tone Junkie premium IR included! You get two different patches – one using an IR Cab by Tone Junkie, and the other using stock cabs.

Description

IMPORTANT NOTES

1. UPDATE YOUR FIRMWARE: Please upgrade the firmware on your Helix and the HX Edit software from Line 6 to the latest before installing this patch. Even if your Helix is up to date, the ‘HX Edit’ app needs to be updated as well. If you get an error importing a patch, the problem is most likely outdated firmware on your Helix/HX Edit. You will need at least firmware 2.82.

2. REVERBS: The 2.6 Firmware update changed the mix levels of the new (HX) reverbs. This patch accounts for those changes, so if you are not updated to 2.6 or later on your Helix, the reverbs will not sound right.

3. IR CAB INCLUDED: This download includes a premium IR from Tone Junkie. We matched this specific IR to this amp, but feel free to experiment with other IR’s for different tonal options. We’ve also included a stock cab version of the patch, but we urge to try the IR – it really does sound better – and it’s included for free :).

Here is the specific IR included, and its location in our Helix:

  • TJ 30 MATCH 25 R121 (top row). In our Helix, it’s in IR slot 30 (this will always correspond with the number after ‘TJ’ in the file name).
  • TJ 21 MATCH 25 R121+57 (bottom row). In our Helix, it’s in IR slot 21 (this will always correspond with the number after ‘TJ’ in the file name).

To purchase more IR packs, visit the Tone Junkie store here.

HOW TO IMPORT THIS PATCH AND IR

  1. Connect your Helix to your computer using a USB Cable
  2. Download and instal the ‘HX Edit’ app from Line 6
  3. In the ‘HX Edit’ app, drag and drop the patch into a slot in the ‘PRESETS’ column
  4. To import an IR, switch to the ‘IMPULSES’ column (next to the PRESETS column), and drag & drop the IR into the appropriate slot (see note above). The image below shows the specific IR location for this patch.
  5. PLEASE NOTE: If you do not have the IR loaded into the ‘IMPULSES’ column, the patch will not sound correct, even if you have the IR block on – you must drag and drop the IR into the IMPULSES column.

SIGNAL FLOW AND EFFECTS

Here is the signal flow and effects:

  1. Input
  2. Deluxe Comp – not mapped to a switch, always on
  3. Heir Apparent – Prince of Tone (voiced to sound like Bradford’s KOT, Yellow side) – mapped to switch labeled ‘KOT-YELLOW’
  4. Heir Apparent – Prince of Tone (voiced to sound like Bradford’s KOT, Red side) – mapped to switch labeled ‘KOT-RED’
  5. Scream 808 – Tube Screamer -mapped to button labeled ‘808’
  6. Volume – mapped to EXP 2
  7. Vintage Digital Delay – 1/4 Delay – mapped to switch labeled ‘1/4 DLY’
  8. Transistor Tape Delay – dotted 8th Delay- mapped to switch labeled  ‘.8th Delay’
  9. Dual Delay (1/8d + 1/8) – mapped to switch labeled ‘DUAL ST DLY’
  10. ’Plate – subtle plate reverb – mapped to a switch labeled ‘Plate Verb’
  11. Glitz Verb  – Ambient reverb – mapped to switch labeled ‘Glitz Verb’
  12. Glitz Verb – bigger modulated verb – mapped to switch labeled “Swells”
  13. Trinity Chorus – mapped to button labeled ‘Chorus’
  14. Amp 1 – Matchstick Jump
  15. Amp 2 – A30 Fawn Brt
  16. Cabs/IR’s – see above for IR info
  17. Simple EQ– Always on EQ – Use this EQ to make tonal tweaks for your guitar/setup. These controls will affect your tone differently than the amp controls. See below for recommended settings.
  18. Gain – 1.5db Boost – not mapped to a switch (used in Snapshots for leads)

USAGE

This patch is meant to be used in either stompbox or snapshot mode. We recommend setting up your Helix to use all ten stomps (stompbox mode) or all eight snapshots (snapshot mode). The Helix LT does not allow 10-button stomp mode, so you’ll have to re-arrange the button assignments to suite your preferences.

STEREO:

The amps and wet effects in this patch are in stereo. If you only use the L/Mono output of the Helix, everything will be summed to mono automatically. 

WET EFFECTS:

This patch differs from our other Helix patches in the placement of the wet effects. In this patch, we put the wet effects in front of the amps. This makes the tone and decay of the wet effects sound quite a bit different than if they’re placed behind the amps. It also mimics the way many popular praise and worship guitar players set up their rigs.

DIRT PEDALS:

Feel free to stack drive pedals for bigger sounds. We voiced the two Heir Apparent blocks to sound like Bradford’s King of Tone settings.

SNAPSHOTS:

There are eight snapshots included in this patch to get different sounds (all patches feature the same snapshots).

They are:

  • Snapshot 1: CLEAN. This is the base clean tone with delay.
  • Snapshot 2: DRIVE. Light overdrive.
  • Snapshot 3: DRIVE+: Bigger overdrive.
  • Snapshot 4: P&W LEAD. Big drive and delay/verb
  • Snapshot 5: AMBI CLEAN: Lots of delay and verb
  • Snapshot 6: EJ CLEAN: Ambient clean with chorus – think Eric Johnson
  • Snapshot 7: WASH LEAD: Huge verb, delay, and drive.
  • Snapshot 8: SWELLS: Huge ambient swells

MAKING ADJUSTMENTS FOR YOUR SETUP

SETTING THE PATCH UP FOR YOUR GUITAR

All guitars are different, so you may want to make changes to suite your playing style and guitar. We set this up with a variety of guitars, including both single coils and humbuckers (primarily a Telecaster style guitar). If your guitar has humbuckers, please refer to the suggested settings below.

We recommend making a copy of the patch and changing the copy just in case you want to revert back to the original.

RECOMMENDED SETTINGS FOR SINGLE COILS:

The version of this patch you initially download is voiced more toward single coils. We built it primarily using a Telecaster style guitar. If you have a humbucker equipped guitar with low-output humbuckers, it should be perfect for your uses too.

Feel free to adjust the amp EQ and the settings of the Cali Q Graphic block (at the end of the patch) if you’d like to make the patch a bit brighter or darker.

RECOMMENDED SETTINGS FOR HUMBUCKERS:

If your guitar has traditional output Humbuckers, try the following changes (we recommend making a copy of the original patch)…

Matchstick Jump AMP:

  • Ch 1 Drive: Change to 0.8
  • Bass: Change to 4.0
  • Treble: Change to 7.0
  • Presence: Change to 7.0
  • Cut: Change to 4.1

Matchstick Jump AMP:

  • Drive: Change to 3.1
  • Bass: Change 5.0
  • Cut: Change to 3.6
  • Treble: Change to 7.5
  • Presence: Change to 4.5

Simple EQ:

  • High Gain: Change to +4.1

VOLUME CHANGES

If you would like to make this patch louder or quieter without affecting tone, the following adjustments can be made:

“Ch Vol” control on the amp module. This will increase or decrease volume without affecting the tone of the amp. This is the primary level adjustment tool I use for changing patch volumes.

Output block level. Changing the level control on the output block (the very last thing in the signal chain) will increase or decrease overall volume. We typically have this set at zero, but feel free to adjust this as you see fit.

CHANGELOG

Initial Release (1.0): 2019-12-31

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.