Holy Ground – Line 6 Helix Patch

$5.99

Line 6 Helix patch for the song Holy Ground by Passion including a premium IR cab by Tone Junkie!. Organized into snapshots, you can get the sounds from the album at the push of a button. You get two different patches – one using an IR Cab by Tone Junkie (included), and the other using stock cabs.

Categories: , SKU: HLS-027

Description

In this play through Bradford is using a Jennings Custom Navigator with Lambertones Crema pickups

IMPORTANT NOTES

1. UPDATE YOUR FIRMWARE: Please upgrade the firmware on your Helix and the HX Edit software from Line 6 to the latest before installing this patch. Even if your Helix is up to date, the ‘HX Edit’ app needs to be updated as well. If you get an error importing a patch, the problem is most likely outdated firmware on your Helix/HX Edit.

2. REVERBS: The 2.6 Firmware update changed the mix levels of the new (HX) reverbs. This patch accounts for those changes, so if you are not updated to 2.6 or later on your Helix, the reverbs will not sound right.

3. IR CAB INCLUDED: This download includes a premium IR from Tone Junkie. We matched this specific IR to this amp, but feel free to experiment with other IR’s for different tonal options. We’ve also included a stock cab version of the patch, but we urge to try the IR – it really does sound better – and it’s included for free :).

Here is the specific IR included, and its location in our Helix:

  • TJ 26 MATCH 25 Fathead 2 . In our Helix, it’s in IR slot 26 (this will always correspond with the number after ‘TJ’ in the file name).

To purchase more IR packs, visit the Tone Junkie store here.

HOW TO IMPORT THIS PATCH AND IR

  1. Connect your Helix to your computer using a USB Cable
  2. Download and instal the ‘HX Edit’ app from Line 6
  3. In the ‘HX Edit’ app, drag and drop the patch into a slot in the ‘PRESETS’ column
  4. To import an IR, switch to the ‘IMPULSES’ column (next to the PRESETS column), and drag & drop the IR into the appropriate slot (see note above). The image below shows the specific IR location for this patch.
  5. PLEASE NOTE: If you do not have the IR loaded into the ‘IMPULSES’ column, the patch will not sound correct, even if you have the IR block on – you must drag and drop the IR into the IMPULSES column.

SNAPSHOTS

This patch is designed to be used in Snapshot mode. To enable this mode in your Helix, go to the ‘Footswitches’ section of the Global Settings and select ‘8 Snapshots’ in the ‘Preset Mode Switches’ menu. Here are the snapshots:

  • SNAPSHOT 1: INTRO/RIFF. The big riff used in the intro and turn-around sections
  • SNAPSHOT 2: CHORUS. Clean tone for the first chorus.
  • SNAPSHOT 3: VERSE 2. Clean tone for the 2nd verse
  • SNAPSHOT 4: CHORUS (+). Bigger rhythm tone for the chorus sections
  • SNAPSHOT 5: INST/SWELL. Ambient swells – useful for the first verse as well.
  • SNAPSHOT 6: BRIDGE. Rhythm tone with overdrive
  • SNAPSHOT 7: SOLO. Big lead tone
  • SNAPSHOT 8: BRIDGE (+): Big rhythm tone for the bridge after the solo section

SIGNAL FLOW AND EFFECTS

Here is the signal flow and effects:

  1. Input
  2. Volume (log curve) – mapped to EXP 2
  3. Deluxe Comp – not mapped to a switch, always on
  4. Minotaur – Klon OD – mapped to switch labeled ‘Klon’
  5. Teemah – Timmy OD – mapped to switch labeled ‘Timmy’
  6. Scream 808 – Tube Screamer OD – mapped to switch labeled ‘808’
  7. Amps – Matchstick CH1 & Litigator
  8. Cab/IR – see above for IR info
  9. Vintage Digital – Dotted 8th note delay – mapped to switch labeled ‘Dotted 8th DLY’
  10. Transistor Tape Delay – Quarter note delay – mapped to switch labeled ‘Quarter DLY’
  11. Mod/Chorus Echo – 8TH note delay – mapped to switch labeled ‘8th DLY’
  12. Plate verb – subtle ‘always on’ type reverb – mapped to switch labeled “Short Verb’
  13. Glitz Verb – big modulated verb – mapped to switch labeled “Long Verb”
  14. Multitap 4 Delay – big ambient delay mapped to button labeled “SWELLS’
  15. Glitz Verb – big ambient verb – mapped to button labeled ‘SWELLS’
  16. Plateaux Verb – Shimmer Verb – mapped to button labeled ‘SWELLS’
  17. Cali Q Graphic EQ – Always on EQ
  18. Looper

USAGE

This patch is meant to be used in Snapshot mode, but can be used in stomp box mode as well. We recommend setting up your Helix to use all ten stomps. The Helix LT does not allow 10-button stomp mode, so you’ll have to re-arrange the button assignments to suite your preferences.

STEREO:

Everything after the cab block runs in stereo. The delays are mono, but they are panned using the mixer block. All the verbs and effects after the delays are stereo effects. If you are able to run stereo, the wet effects will sound bigger and better. If you only use the L/Mono output of the Helix, everything will be summed to mono automatically. NOTE: Do not use just the Right output of the helix – some of the delays will not be audible if you do this.

DIRT PEDALS:

Feel free to stack drive pedals for bigger sounds. All three one at once will give you a lead/solo tone.

DELAYS:

The dotted 8th delay is in parallel with the quarter delay and 1/8th delay, so they’ll be more rhythmic when used together.

SWELLS:

Hit the ‘Swells’ button to turn on the Multitap delay with big ambient reverb.

EQ AT THE END OF THE CHAIN?:

Typically when you record guitar parts in the studio, you’ll put EQ and compression on the final tone. We’ve replicated the EQ in this patch. You can use the Cali Q Graphic block for final tone shaping. See below for recommended settings.

MAKING ADJUSTMENTS FOR YOUR SETUP

SETTING THE PATCH UP FOR YOUR GUITAR

All guitars are different, so you may want to make changes to suite your playing style and guitar. We set this up with a variety of guitars, including both single coils and humbuckers (primarily a Telecaster style guitar). If you have higher output humbuckers, you might want to make adjustments based on the suggestions below.

We recommend making a copy of the patch and changing the copy just in case you want to revert back to the original.

RECOMMENDED SETTINGS FOR SINGLE COILS:

The version of this patch you initially download is voiced more toward single coils. We built it primarily using a Telecaster style guitar. If you have a humbucker equipped guitar with low-output humbuckers, it should be perfect for your uses too.

Feel free to adjust the amp EQ and the settings of the Cali Q Graphic block (at the end of the patch) if you’d like to make the patch a bit brighter or darker.

RECOMMENDED SETTINGS FOR HUMBUCKERS:

If your guitar has traditional output Humbuckers, try the following changes (we recommend making a copy of the original patch)…

AMP SETTINGS:

  • Litigator Drive: Change to 2.0
  • Litigator Bass: Change to 2.0
  • Litigator Treble: Change to 7.5
  • Matchstick Drive: Change to 2.1
  • Matchstick Bass: Change to 2.1
  • Matchstick Cut: Change to 1.1

CALI Q GRAPHIC SETTINGS:

  • 2200 Hz Slider: Change to +3.0
  • 6600 Hz Slider: Change to +2.5

VOLUME CHANGES

If you would like to make this patch louder or quieter without affecting tone, the following adjustments can be made:

“Ch Vol” control on the amp module. This will increase or decrease volume without affecting the tone of the amp. This is the primary level adjustment tool I use for changing patch volumes.

Output block level. Changing the level control on the output block (the very last thing in the signal chain) will increase or decrease overall volume. We typically have this set at zero, but feel free to adjust this as you see fit.

CHANGELOG

Initial Release (Version 1.0): 2019-05-22

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.